Why Hire Genuine Haki.JPG

COPY SYSTEMS

Snap! The Real Risk of Copy  Cat Systems


It may be one of the oldest grouses in the construction industry, but the need to flush out and banish bad copycat scaffold systems has as much to do with Construction (Design and Management) Regulations (CDM) and safe systems of work, as it does with commercial concerns.

As Gary Griffiths, MD of UK System Scaffold Hire explains: “I have no problem with fair competition and freedom of choice.  Put me in a supermarket and I will buy own brand baked beans because I prefer their taste and may save a few pence.  However, tell me that one tin in every thousand will contain a potentially lethal ingredient and would I make the same choice?  Not a chance.  A small cost saving would bear no weight against the potential risk to the lives of my family.

“The same comparison can be applied to bad copycat access systems.  They may at first look the same, they may be cheaper to buy or hire, - yet they could also contain potential flaws which can lead to the catastrophic collapse of scaffold and a subsequent loss of life. That’s why UK System Scaffold Hire only use genuine HAKI components.

“The lesson in both cases must be to “read the label” and consider just as much what it doesn’t say as what it does!

Legislation is getting increasingly proscriptive.  CDM Regulations place an emphasis on planning and managing risk throughout the construction process.  Combine that with the change to corporate manslaughter legislation and the construction industry should, by now, have sat up and taken notice.

In truth, the planning, erection and dismantling of scaffolding is subject to the same stringent CDM regulations as the permanent structure under construction.  These duties include, amongst others, the duties of designers to eliminate hazards which may give rise to risks, to reduce risks from any remaining hazards and in doing so to give collective measures priority over individual measures.  The same regulations specify that any structure designed for use as a workplace (e.g. scaffold) must take account of provisions of the Workplace Health & Safety and Welfare Regulations 1992 which relate to the design of and materials used in the structure.

To put it bluntly, regulations and legislation place an overriding burden on scaffold companies to prove that they have done everything reasonably possible to ensure that their designs are robust and the components they use are fit for purpose.  Given this imperative, it’s incredible how many scaffold companies supplement their stocks by hiring components which have no provenance.

Whether or not the decision to hire copycat systems is made unwittingly, do these contractors appreciate the real extent of the gamble they are taking?  One weak component, one substandard weld, one length of tube made from an inferior steel, can compromise the integrity of an entire structure, possibly leading it to collapse with the result that lives can be lost.

UK System Scaffold Hire chose to be HAKI specialists because we know it provides significant time and cost savings on major projects where reliability and safety is paramount – for example where suspended scaffold is required or where temporary bridges are required to provide public access.

Scaffold can be suspended from the highest bridges or built to dizzying heights, and the technology to build in safety can never come cheaply.  HAKI has invested enormously to provide peace of mind: even before a prototype is made, finite element analysis enables molecular stress levels to be analysed, so that optimum performance can be guaranteed while using the minimum quantity of metal.  A combination which optimises strength while minimising the weight of each component.

HAKI has developed a unique ultra-high tension steel which is lighter than comparable strength products and uses less recycled steel, making tubes more robust for welding and better suited to cold forming.  The result is components which are lighter and stronger, making life easier and safer for scaffolders.  Furthermore, each individual component is marked for traceability, which means that you can follow an individual component right back to the steel batch from which it was manufactured.

In a world that is becoming ever more litigious it is more and more important that scaffold companies ask pertinent questions of scaffold hire companies to determine whether they have an audit trail to demonstrate that their stock has been manufactured to the highest standards and that the risk of failure has been minimised. 

So the next time you are considering hiring access systems, just ask yourself one or two pertinent questions: 

  • Do I know enough about where the scaffolding was sourced from?

  • Am I confident that the product’s design is really fit for purpose?

  • Are the components precision made so that they fit together properly and easily into each other all the way through the project (remember, if scaffold is 1° out of plumb it reduces the load bearing capacity by 10%!)

  • Does scaffold come with a customer support package that includes a proper manual and a training facility?

  • Is the scaffold designed to meet performance criteria or simply copied to “look the part”?

  • In short, when I send my men out on site, can I be confident that my company will be fully compliant with CDM?

MEET THE TEAM

Our Team has some of the best skills in scaffolding industry



UK SYSTEM SCAFFOLD HIRE

★★★★★ "FIVE STAR ASSURANCE" ★★★★★

NASC Logo
  • Advanced product range

  • Substantial stockholding

  • Unrivalled "know how"

  • "On time" supply

  • Total commitment to customer support

NASC Logo

GENUINE HAKI GUARANTEED

UK System Scaffold Hire uses only genuine HAKI Access Systems to help serious scaffold companies work smarter, work faster, win more complex contracts and increase profitability.

Using only genuine HAKI components is important for peace of mind, important for safety and important if you want to meet the highest compliance requirements.

Every component that carries the HAKI name has been designed to deliver maximum safety and productivity, has been manufactured from the very best materials and tested to ensure its integrity. That’s why every HAKI component carries a unique identification mark to provide complete traceability.

Latest

UK System Scaffold Hire Projects and News

BENEFITS OF HIRING FROM UK SYSTEM SCAFFOLD HIRE

Hiring from UK System Scaffold Hire reduces your need for capital outlay, protecting your cash flow and protecting your capital reserves. UK System Scaffold Hire’s impressive stock levels delivery also means you don’t have to worry about stock issues.

It’s the quick and low cost way of supplementing your own stocks – especially when you can rely on U K System Scaffold Hire to deliver the correct products on time – every time.

Tap in to the U K System Scaffold Hire difference.

Hiring from U K System Scaffold Hire can offer significant additional benefits, too:

Our unrivalled product knowledge means we can offer expert advice to help you develop niche markets especially projects requiring Public Access Staircases, Public Access Bridges, Loading Towers, Suspended Scaffold, Temporary Shelters and Temporary Buildings.

Our experience means U K System Scaffold Hire can help you to lower project costs and raise profitability.